There are several methods. One of these methods is to draw a cross line on the monitor and measure it by using digital micrometer XY table.
Another methos is to measure the length by using software. In that case, the lens, camera, PC monitor and resolution are all set on the same environment
Therefore, if you calibrate at each magnification and save the calibration data first. Then, you can view the data without calibrating.
Since our standard variable magnification lens (SDS – M) has the stop key, it is reproducible for anyone using it. It is possible to measure if you already read the calibrated file with that scale before.
Furthermore, with a high-definition non-calibration microscope, calibration values are pre-registered from the outset, and since the camera and lens are always synchronized, there is no need for calibration. This allows for instant measurement even when changing the magnification.
 |
Standard variable magnification lens |
 |
5MP USB3.0 microscope equipped with a zoom lens with a click function TG500CS |
 |
The camera and lens are synchronized!
|
Please contact our Technical Advisor for more details.
