High Magnification USB 3.0 Microscope FZ500CS

New standard high-speed USB 3.0 microscope

 

● Safe and low cost USB 3.0 connection

● Standard simple measurement software to measure the distance between two points;

● A lot of software for measurement, focus stacking, and image connection;

● Customer software development also available.

Product Inquiry phone028-3911-2006

Features

Introduction of standard equipment software

Functions of standard equipment simple measurement software:
Save still images (JPEG / BMP formats)
Measure the distance between two points
Pause
Save / read calibration data during measurement
Fit-in, digital zoom
Supported operating systems: Windows 8 or later
* Calibration glass scale is optional.

Specification

General Specification

Model Number
FZ500CS
Magnification
45x-270x
Field-of-view
8.0mmx6.0mm （45x）、1.2mmx0.9mm （270x）
Stand Dimensions
388mmx268mm x350(H)mm
Supported Operating System
Windows7、8、8.1、10、11
Memory
4GB OR ABOVE

Camera

Image Sensor
1/2.5”CMOS
Number of Pixels
5MP
Maximum Resolution
2592x1944
Frame Rate
2592×1944（18fps）※The actual frame rate will vary depending on the performance of your computer and the setting environment.
Connection
USB3.0
CPU Requirement
Intel core i5 or Above

Lens

Optical Magnification
x0.7-ｘ4.5
Working distance
W.D.95mm
Lens Holder Diameter
φ50mm
Mount
C mount

Accessory

5MP USB 3.0 camera
5MP USB 3.0 camera
Zoom lens
USBマイクロスコープ
Stand
USBマイクロスコープ
Protective cover
Standard Viewer software

【Optional auxiliary lens to increase magnification】

 
  

Auxiliary lens for FZ series microscopes.
May increase or decrease the magnification.

 

1.5x auxiliary lens
Magnification: From 65x to 390x
Working distance: 52 mm

 

2.0x auxiliary lens
Magnification: From 90x to 540x
Working distance: 39 mm

 

0.75x auxiliary lens
Magnification: From 35x to 210x
Working distance: 113 mm

 
 

Introduction of optional software

We have various optional software!
 
●We also offer a lot of optional software for measurement, focus stacking, automatic visual inspection, image connection, and graphite spheroidization rate measurement.
You can also use the commercially available application (* DirechShow compatible) that are currently in use.
 

Optional measurement software

High-performance image processing measurement software 　MFShip

 

 

●Measurement support (Edge automatic fit) function
●Pin-point digital zoom function
●Focus stacking function for easier use
GS-4SQ calibration tool also included
(with 4 sets of increments 20µm / 100µm / 500µm / 1mm)

【Measurement items】
● Distance between two points
● Distance between parallel lines
● Distance between horizontal parallel lines
● Distance between vertical parallel lines
● Vertical distance
● Distance between circle centers
● Point coordinates
● Angle from 3 points
● Angle from 4 points
● Diameter of a circle defined by 3 points
● Diameter of an approximate circle
● Rectangle
● Ellipse
● Approximate straight line
● An arc defined by 3 points, etc.		 【Useful functions】
・Edge automatic fit function
・Pinpoint digital zoom function
・Scale display示
・Focus stacking function
・Report creation
・Image connection (tiling) function

 

Comparison between standard Viewer software and high-performance image processing measurement software (MFShip)

・The main differences are summarized in the table. Please select based on required functions.

  Standard Viewer software
MFShip
Distance between two points ○ ○
Focus stacking × ○
Export to Excel × ○
Show thumbnail display of image data × ○
Change screen display magnification × ○
Show crosslines × 〇
Show layout grid × ○
Supported operating systems Up to Windows 10 Up to Windows 10

 

 

Optional image processing software

 
I can see scratches that I couldn’t see before! I can also pre-process images before measuring!
 
 

 

Inquire about this product

phone028-3911-2006

Business hour: 08:00 - 17:00
Closed on weekends & public holidays