Dimmable even when lighting independently in 4 parts!
With a removable diffuser plate!
● Inner diameter φ70mm, tip inner diameter φ60mm, outer φ96mm
● 4 divisions can be lit independently
● Dimmable even when lighting independently in 4 divisions
● Diffuser plate can be removed
● Can be attached to microscopes, microscopes,…
Dimensional drawing
4 divisional 80-lamp LED ring lighting LED-80T
4 parts can be lit independently
It can be lit and dimmed with a controller.
Application examples
It can be attached to a microscope with a groove cut in the skirt of the objective lens.
In the case of microscopes without grooves, it can be used by using a convenient option.
|
Use with microscope
|
Use with macro lens
※Optional LED angle is used in combination
|
Forte
Control box separated. It is convenient because it can be dimmed at hand.
Dimmable with a control box that is separated from the LED body
Diffuser is standard equipment
Diffuser plate on the front of the LED as standard equipment
(The diffuser can be removed.)
Double array of LEDs
Double arrangement of 80-LED ring lights to increase light intensity
About the attachable size
|
If all 3-point screws are loosened, it can be attached to lenses up to φ70mm.
|
If the 3-point screw is tightened, it can be attached to a lens with a diameter of φ30 mm or more.
|
Useful options when used with a microscope
If you want to attach the GR80-N2 to another company’s microscope
Ring adapter for stereo microscope for filter diameter φ48
RA-48
Ring adapter for stereo microscope for filter diameter φ48
RA-49
This adapter enables the mounting of the GR10-N ring illumination to a stereo microscope with a filter diameter of φ48 or φ49 inside the tip of the objective lens.
Attach the ring adapter (RA48/49) to the tip of the objective lens. Fix the LED ring lighting there
Useful options when used with a microscope
LED angle
LED-A2
Useful LED angles if you want to fix the lighting
● How to use with LED Angle LED-A2
Use the GR80-N2 by attaching it to the LED angle with a 3-point screw.
● How to use with LED angle LED-A2 + magnet base
Attach the GR80-N2 to the LED angle attached to the magnet base.
