Amazing long range!
May observe at a long working distance from 400 mm to 200 mm.
●Low cost and reliable
●Standard simple measurement software to measure the distance between two points
●A lot of software for measurement, focus stacking, and image connection
●Customer software development also available.
Product Inquiry
Features
Introduction of standard equipment software
- Functions of standard equipment simple measurement software:
Save still images (JPEG / BMP formats)
Measure the distance between two points
Pause
Save / read calibration data during measurement
Fit-in, digital zoom
Supported operating systems: Windows 8 or later
* Calibration glass scale is optional.
How to observe at 400 mm working distance
- Maximum field of view (minimum magnification)
- Minimum field of view (maximum magnification)
How to observe at 300 mm working distance
- Maximum field of view (minimum magnification)
- Minimum field of view (maximum magnification)
How to observe at 200 mm working distance
- Maximum field of view (minimum magnification)
- Minimum field of view (maximum magnification)
Specification
General Specification
- Model Number
- LRA500CS-E
- Magnification
- 3x－60x
- Supported Operating System
- Windows7、8、8.1、10、11
- CPU
- Intel core i5 or above
- RAM
- 4GB OR ABOVE
- Field of view at 400 mm working distance Magnification: 3x - 30x
- 113.0mmx85.0mm(3x)、 12.0mmx9.0mm（30x）
- Field of view at 300 mm working distance Magnification: 4x - 40x
- 81.0mmx61.0mm（4x）、 8.1mmx6.1mm（40x）
- Field of view at 200 mm working distance Magnification: 6x - 60x
- 52.5mmx39.5mm（6x）、 5.2mmx3.9mm（60x）
Camera
- Image Sensor
- 1/2.5”CMOS
- Number of Pixels
- 5MP
- Maximum Resolution
- 2592×1944
- Frame Rate
- 2592×1944（18fps） ※The actual frame rate will vary depending on the performance of your computer and the setting environment.
- Connection
- USB3.0
Lens
- Optical Magnification
- x0.75－x4.5
- Focus Distance
- W.D. 90mm
- Lens Holder Diameter
- φ50mm
- Mount
- Ｃ mount
Accessory
- 5MP USB 3.0 camera
- Lens (with 2x extender)
- Edge fixing stand with 3D arm
- Extension kit
- Protective cover
- Standard Viewer software
Introduction of optional software
We have various optional software!
●We also offer a lot of optional software for measurement, focus stacking, automatic visual inspection, image connection, and graphite spheroidization rate measurement.
You can also use the commercially available application (* DirechShow compatible) that are currently in use.
Optional measurement software
|
High-performance image processing measurement software MFShip
●Measurement support (Edge automatic fit) function
●Pin-point digital zoom function
●Focus stacking function for easier use
GS-4SQ calibration tool also included
(with 4 sets of increments 20µm / 100µm / 500µm / 1mm)
|
 |
【Measurement items】
● Distance between two points
● Distance between parallel lines
● Distance between horizontal parallel lines
● Distance between vertical parallel lines
● Vertical distance
● Distance between circle centers
● Point coordinates
● Angle from 3 points
● Angle from 4 points
● Diameter of a circle defined by 3 points
● Diameter of an approximate circle
● Rectangle
● Ellipse
● Approximate straight line
● An arc defined by 3 points, etc. |
【Useful functions】
・Edge automatic fit function
・Pinpoint digital zoom function
・Scale display示
・Focus stacking function
・Report creation
・Image connection (tiling) function |
Comparison between standard Viewer software and high-performance image processing measurement software (MFShip)
・The main differences are summarized in the table. Please select based on required functions.
| |
Standard Viewer software |
MFShip
|
| Distance between two points |
○ |
○ |
| Focus stacking |
× |
○ |
| Export to Excel |
× |
○ |
| Show thumbnail display of image data
|
× |
○ |
| Change screen display magnification |
× |
○ |
| Show crosslines |
× |
〇 |
| Show layout grid |
× |
○ |
| Supported operating systems |
Up to Windows 10 |
Up to Windows 10 |
Optional image processing software
|
I can see scratches that I couldn’t see before! I can also pre-process images before measuring!
|
 |
