HOLE INSPECTION LENS 　PHL178

HOLE INSPECTION LENS

● Suitable for inspecting inner surface of the hole
● Fisheye lens with the deep depth of field
● C-mount competible lens

Product Inquiry 028-3911-2006

Shooting example

1/1.8 inch – By camera USB ( with 4:3 aspect ratio )

1/2 inch – By Camera FULL HD ( with 16:9 aspect ratio)

1/3 inch by Camera Full HD ( with 16:9 aspect ratio )

1/3 inch by Camera 40MP ( with 4:3 aspect ratio)

Most attractive feature of this model

●Feture 1: 178° wide – angle lens ( hole inspection lens)

Viewing angle 178°
The viewing angle expands at an almost horizontal angle as shown below

Able to observe 360° full circumference at a glance

The fisheye effect allows to observe a wide range of inner walls at a glance

● Feature 2: Fisheye lens with deep depth of field

Able to the inner wall of the hole without inserting a lens into the hole

Hole diameter is φ8mm～φ100mm, about the same as the depth ( example: Diameter 100m => depth 100mm)
Using a lens with a deep depth of field at first. In addition, the depth of field can be adjusted with an aperture mechanism.

The depth of field of images taken by hole inspection lens is deeper than images taken by fixed – focus lenses.

●3. Feature 3: There is no need to insert it into the object, it is difficult to buffer

Hall lenses have a wide viewing angle of 178°, so there is no need to insert them into the holes.
Even at the entrance of the hole or when inserted, with just a few millimeters, the possibility of causing damage to the object is significantly reduced.